DG800-3

by

Mounted the elevator servo, I found a one in the box that will do nicely. I wanted to use a beefier link to the elevator, but there was not enough space. So a 2 mm version will have to do for now. Maybe change it for 3 mm if I work out how to do … Read more

DG-800-2

by

Part 1 is a bit back, describing how I did a quick and dirty cockpit frame. Today was the start of more serious stuff, like drilling the holes in the fuse for the all important bit in the middle! First I created a jig that holds and aligns the fuse, and made very, very sure … Read more

Logging your flights

by

I discovered a fun website the other day, where you can ‘virtually’ compare your achievements with other pilots. Of course I am no match for 6 meter ships, but it is fun. Soaringleague.net is the place to visit. It is a pretty new site, I guess it’s real goal is to log GPS flights, but … Read more

DG800 from Rödel modell

by

One minute you contemplate building yourself a nice big glider, next time you wake up you have a shed with a few big fish! So far it’s only a 5 meter ASK21 en a 4 meter DG800. Both in need of minor assembly. Since the DG800 is the smaller (and cheaper) one, I am going … Read more

Does not time fly!

by

It’s been a while, I must admit. We have the odd bit of summer, interspersed with bouts of autumn and spring and winter. That’s summer for you! Given the general uncertainty of the results of the plans of our minister Dobrin (He who wants to put a ceiling on all model-aircraft activities of 100 meters, … Read more

Noise (again)

by

I found myself volunteering for a role in the Noisy-committee of the club. We have to abide by the rules, so the first question is ”what are the rules?” Following is just a collection of bits and pieces, just to get started. DMFV    (pdf LuftVO) DAEC Bocholt RC-Network More RC-Network Laermmessung1a Excel sheet for calcs (download to … Read more

Out with the old, in with the new..

by

‘t Is the time of year to indulge in a nice wee present for oneself. Given that I need more exercise, I decided to treat myself to a fresh new DLG. The present Blaster is still flying well, but the new breed of DLG´s is just that, totally different animals. Rather then go for something … Read more

Winter is here again, time for an update

by

It all of a sudden feels cold and miserable out there, so this is a good time to start a new project. For many a year I have wanted to build a nice biplane. The thoughts have gone from a Waco to a Starduster, or Acroduster. I finally settled on a Skybolt. The main reason … Read more

I built myself a 3D-printer

by

..and a whole new world opens. This has been a project, both rewarding and frustrating. but I have learned a lot, and at present I am able to make quite acceptable printed parts. Of course this whole thing of 3D printed parts means you have to learn how to fit those parts into the modelling … Read more

RES in the making too

by

As a first build in our new residence I got myself a few RES kits from Josef Gergetz. RES stands for Rudder Elevator and Spoiler. It´s a class of glider measuring 2 meters span, and it is very restricted as to the materials and construction used. It is intended as a low cost platform for … Read more