The first leg is the easiest, the second has to match, which is far more work. However, I’m quite pleased with the weekends work. Total weight of the leg is 118 gram. I also added all the pilot seat tubing, giving a total fuse-weight of 1148 gram. (still hoping for a less then 2 kilo RTF fuse.)
I started with the main pipe, angled forward 8 degrees. Followed by the cross-way pipe to which the bungy-cord attaches. Next the support for that, so that the triangle is complete. Next the rear support to lower main leg. Then the bit between front and rear support, and finally the cross between rear and bungy-cord pipe.
Note to self: Need to make a 4+ mm bushing to fit snugly into the 5 mm fuse attachment tube. With a 4+ mm bushing and 3 mm bolt to secure the bushing, all will be perfect!
