Tail wheel support.

Wanted to keep this reasonably light, not perfect scale, but looks close enough when done. I can always change it! Mounting is with 2 M4 screws. The seat is built from 6 alu strips going front to back and 7 crosswise. Sort of like in this test. I need to think about this a bit, … Read more

How to build your own plane

Lots of inspiration comes from: Achim Engels, build your own Fokker plane.  And another one: Kerry Ann’s Piper. Again on close inspection you recognize so many of the tricks that are used in the SA-750. If some construction detail is not clear, check here! Another great source is Biplaneforum.com . To view everything it wants … Read more

One legged plane

The first leg is the easiest, the second has to match, which is far more work. However, I’m quite pleased with the weekends work. Total weight of the leg is 118 gram. I also added all the pilot seat tubing, giving a total fuse-weight of 1148 gram. (still hoping for a less then 2 kilo … Read more

After brazing

Closeups of my handywork. After sandblasting I ‘ll reheat the joints to make them flow a bit more and fill any voids leftover. This will be for cosmetical reasons only.

Wing & u/c attachment hardware

The plans call for square tubing for mounting the wings, but you guessed it, not available in the size I want, not even close. Here I have to deviate from the plans and make something that will look the same, but is something I can make. At stations 31 and 51 I added the normal … Read more

Rudder finished as well.

As you can see, the new shipment of tubes has arrived. Visible progress is made again today. Overall I’m happy with the result, there are always little things that do not quite turn out as intended, but since this is all about learn as you build, it’s not a disaster. (So far I have not … Read more

Adding some direction

Just a relative quick job tonight: making the fin. The only noteworthy item would be that after installing the ribs, I still had to drill a hole for the bracing rods. I decided to simply cut a slit with the Dremel and enlarge it to fit the tube. Seems to work well, and since it … Read more

Printing some streamlining bits..

Given that it is difficult to find the right size streamline tubing, I better go ahead an make some. With the open-scad script I found I made a handful test pieces. The idea at the moment is to attach the plastic with a layer or 2 of 25 gram glass cloth. That should fill the … Read more

Streamline tubing

I did say undercarriage? A whole new can of worms just opened. I had hoped to be able to use a normal streamline tube as offered by various vendors. However, can’t find anything close enough to what I want. I could make my own from round tube, just like friend Achim , but that’s a … Read more